Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Asian Journal of Scientific Research
  Year: 2008 | Volume: 1 | Issue: 1 | Page No.: 12-21
DOI: 10.3923/ajsr.2008.12.21
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

The Effect of Feed Rate and Cutting Speed to Surface Roughness

A.B. Abdullah, L.Y. Chia and Z. Samad

Abstract:
In this study, a sensitivity analysis method was used to identify the optimal machining conditions with respect to surface quality. Presently, programming Turbo C++ is used to evaluate the properties of machined surfaces with cutting parameters using arbitrary sets of experimental values. Based on the proposed equations and its differentiated function, the quality of surface roughness can be known clearly through the sensitivities of proper local deviations. This method shows the sensitivity of each surface roughness to the machining parameters. The variables investigated were cutting speed (Vc), depth of cut (d), feed rate (fr) and the surface roughness (Ra). The result indicates that machining parameter that had the highest influence on surface roughness is the feed rate followed by the cutting speed and the depth of cut. Finally experiment analysis was carried out to verify the analytical results.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Development of Surface Roughness Prediction Model for High Speed End Milling of Hardened Tool Steel
How to cite this article:

A.B. Abdullah, L.Y. Chia and Z. Samad, 2008. The Effect of Feed Rate and Cutting Speed to Surface Roughness. Asian Journal of Scientific Research, 1: 12-21.

DOI: 10.3923/ajsr.2008.12.21

URL: https://scialert.net/abstract/?doi=ajsr.2008.12.21

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom