Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Asian Journal of Applied Sciences
  Year: 2008 | Volume: 1 | Issue: 4 | Page No.: 334-340
DOI: 10.3923/ajaps.2008.334.340
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Evaluating the Machining Characteristics of Oil Palm Lumber

J. Ratnasingam, T.P. Ma, M. Manikam and S.R. Farrokhpayam

Abstract:
A series of machining experiments were carried out using a CNC multi-function machine, to evaluate the sawing, routing and boring as well as the tool wearing properties of the oil palm lumber. The result found that the resultant machined surface of the oil palm lumber of higher densities (>500 kg m-3) is comparable to that of solid Rubberwood. Further, it was also found that the machining properties of oil palm lumber was markedly improved when machining at high cutting speeds, which in turn significantly reduced the incidence of machining defects such as fiber tear out and chip out. However, with higher cutting speeds, accelerated tool wear is inevitable and coupled with the fact that the oil palm lumber is markedly abrasive due to its high silica content, the resulting tooling cost is a concern. Hence, the development of new tooling for the machining oil palm lumber is recommended. Despite this shortcoming, the lower cost and environmental friendly reputation of the oil palm lumber should encourage wider utilization of the material in the furniture industry.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Fatigue Strength of Mortise and Tenon Furniture Joints Made from Oil Palm Lumber and Some Malaysian Timbers
  •    Static and Fatigue Strength of Oil Palm Wood Used in Furniture
  •    Density Distribution of Oil Palm Stem Veneer and Its Influence on Plywood Mechanical Properties
How to cite this article:

J. Ratnasingam, T.P. Ma, M. Manikam and S.R. Farrokhpayam, 2008. Evaluating the Machining Characteristics of Oil Palm Lumber. Asian Journal of Applied Sciences, 1: 334-340.

DOI: 10.3923/ajaps.2008.334.340

URL: https://scialert.net/abstract/?doi=ajaps.2008.334.340

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom