Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2012 | Volume: 12 | Issue: 10 | Page No.: 947-954
DOI: 10.3923/jas.2012.947.954
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Effect of Cooling Environment on Grinding Performance of Nickel Based Superalloy Inconel 718

Sandeep Huddedar, Pankaj Chitalkar, Arvind Chavan and Raju S. Pawade

Abstract:
The study presents the experimental investigation of surface grinding of superalloy Inconel 718. The grinding performance in terms of grinding force, surface roughness and surface topography were examined by conducting statistical experiments. The parameters that have been chosen as control factors are: table speed, infeed, grit size and the type of lubricant. An L27 orthogonal array experiments were conducted. The results show that the grit size and infeed are the most significant parameters on surface roughness Ra measured across the table feed direction. The interaction effect between lubricant and grit size is relatively important as compared to the individual effect of the latter variable. As far as the grinding forces are concerned, the grit size and table speed have largest contribution among the chosen parameters. SEM (Semester) examination revealed the flaws such as abrasion marks, smeared layers and micro-particle deposits on the surfaces produced in grinding.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Sandeep Huddedar, Pankaj Chitalkar, Arvind Chavan and Raju S. Pawade, 2012. Effect of Cooling Environment on Grinding Performance of Nickel Based Superalloy Inconel 718. Journal of Applied Sciences, 12: 947-954.

DOI: 10.3923/jas.2012.947.954

URL: https://scialert.net/abstract/?doi=jas.2012.947.954

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom