Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2011 | Volume: 11 | Issue: 14 | Page No.: 2578-2584
DOI: 10.3923/jas.2011.2578.2584
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
Energy Cost Modeling for High Speed Hard Turning
Muataz Hazza Faizi Al-Hazza, Erry Yulian T Adesta, Afifah Mohd Ali, Delvis Agusman and Mohammad Yuhan Suprianto

Abstract:
This study presented an empirical study to model the cost of the energy for high speed hard turning. A set of experimental machining data to cut hard AISI 4340 steel was obtained with a different range of cutting speed, feed rate and depth of cut with negative rake angle. Regression models were developed by using Box-Behnken Design (BBD) as one of Respond Surface Methodology (RSM) collections. Neural network technique was deployed using MATLAB to predict the energy as a part of the artificial intelligent methods. The data collected was statistically analyzed using Analysis of Variance (ANOVA) technique. Second order energy prediction models were developed by using (RSM) then the measured data were used to train the neural network models. A comparison of neural network models with regression models is also carried out. Predictive Box-Behnken models are found to be capable of better predictions for energy within the range of the design boundary.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Consumer Behavioural Buying Patterns on the Demand for Detergents Using Hierarchically Multiple Polynomial Regression Model
  •    Surface Roughness Prediction Techniques for CNC Turning
  •    Empirical Modeling of Surface Roughness in turning process of 1060 steel using Factorial Design Methodology
  •    Machining of Nickel Alloy 242 with Cubic Boron Nitride Tools
  •    Artificial Neural Networks to Predict of Liquidus Temperature in Hypoeutectic Al-Si Cast Alloys
How to cite this article:

Muataz Hazza Faizi Al-Hazza, Erry Yulian T Adesta, Afifah Mohd Ali, Delvis Agusman and Mohammad Yuhan Suprianto, 2011. Energy Cost Modeling for High Speed Hard Turning. Journal of Applied Sciences, 11: 2578-2584.

DOI: 10.3923/jas.2011.2578.2584

URL: https://scialert.net/abstract/?doi=jas.2011.2578.2584

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom