
	Journal of Applied Sciences
	Year: 2010 \| Volume: 10 \| Issue: 10 \| Page No.: 813-822 DOI: 10.3923/jas.2010.813.822

The Damage of the Cutting Tools out of Carbide Metallic During the Turning of a Soaked and not Hardened Steel XC38

M. Seghouani, A. Tafraoui and S. Lebaili

Abstract: The purpose of this study to widened knowledge on the use of the cutting tools out of metal carbide and to define of it the influence of the elements of the mode of cut on the behaviour of these tools during the machining of treated steel XC38 and untreated. This study aimed at evolution determined in experiments of the wear of a cutting tool out of metal carbide with plate reported of P30 nuance for an operation of slide-lathing in turning on soaked and not hardened steel XC38 test-tubes. This research is based on the model of Taylor to determine the lifespan of the cutting tool according to the various parameters of cut, like the cutting speed Vc, the advance of cut a, the depth of cutting P. In order to express the operational limits of the tool for slide-lathing in a preventive way. The model makes it possible to determine the time of change of the tool and to regard it as constraint for the respect of the roughness of the work piece during a work of series in conventional machining.

PDF Fulltext XML References Citation Report Citation

RELATED ARTICLES:

•	Machining of Cemented Tungsten Carbide using EDM

How to cite this article:

M. Seghouani, A. Tafraoui and S. Lebaili, 2010. The Damage of the Cutting Tools out of Carbide Metallic During the Turning of a Soaked and not Hardened Steel XC38. Journal of Applied Sciences, 10: 813-822.

DOI: 10.3923/jas.2010.813.822

URL: https://scialert.net/abstract/?doi=jas.2010.813.822

COMMENT ON THIS PAPER

Navigation


		Online First
		Current Issue
		Previous Issues
		Editorial Board
		Submit a Manuscript
		Guide to Authors
		Subscribe to E-alerts

Indexed In


		AGRIS
		ASCI-Database
		Asian Digital Library
		Chemical Abstract Services
		Google Scholar

Science Alert