Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2010 | Volume: 10 | Issue: 22 | Page No.: 2869-2874
DOI: 10.3923/jas.2010.2869.2874
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Fatigue Strength of Mortise and Tenon Furniture Joints Made from Oil Palm Lumber and Some Malaysian Timbers

Jegatheswaran Ratnasingam, Florin Ioras and Thomas McNulty

Abstract:
A study was undertaken to evaluate comparative bending and fatigue strengths of rectangular mortise and tenon furniture joints made from oil palm (Eleais guineensis) lumber against a few established furniture wood materials. This is owing to the fact that, although the rectangular mortise and tenon joints are the most commonly joints used in chair construction, studies on its strength under cyclic loading is very limited. The fact that furniture joints are the weakest link in the furniture structure, it is necessary to establish its strength performance especially under repeated loading as experienced by the chair in service. The results showed that the bending strength of the oil palm lumber joints were half the strength of the wooden joints. However, in terms of fatigue strength, joints made from oil palm lumber showed comparable performance with the other wood materials. The results also showed that the allowable design stresses for rectangular mortise and tenon joints could be set at 20% of its bending strength. This study has far reaching implications on furniture engineering as it suggest that proper joint design is mandatory not only to ensure the furniture’s reliability in service, but also improve its aesthetic and production imperatives.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Influence of Nanoclay/Phenol Formaldehyde Resin on Wood Polymer Nanocomposites
  •    Static and Fatigue Strength of Oil Palm Wood Used in Furniture
  •    The Market Potential of Oil Palm Empty-Fruit Bunches Particleboard as a Furniture Material
  •    Evaluating the Machining Characteristics of Oil Palm Lumber
How to cite this article:

Jegatheswaran Ratnasingam, Florin Ioras and Thomas McNulty, 2010. Fatigue Strength of Mortise and Tenon Furniture Joints Made from Oil Palm Lumber and Some Malaysian Timbers. Journal of Applied Sciences, 10: 2869-2874.

DOI: 10.3923/jas.2010.2869.2874

URL: https://scialert.net/abstract/?doi=jas.2010.2869.2874

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom