Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2008 | Volume: 8 | Issue: 5 | Page No.: 876-880
DOI: 10.3923/jas.2008.876.880
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Stress Analysis of Marble Sawing Disc in Cutting Process

Ismail Ucun, Mehmet Colakoglu and Suleyman Tasgetiren

Abstract:
In this study, stresses in the marble cutting disc are investigated by finite element method. Normal and tangential forces in stress analysis are considered and critical stress regions are found. Depending on the chosen depth of cut, (i.e., 17.5, 40, 70 and 108 mm) these forces are applied in different values taken from an experimental study. In addition, the equivalent stress is also tried to determine under shock loading which occurs depending on working conditions and hardness of the marble. The analysis is carried out at four different cutting speeds. The results under the normal and shock loads are compared and the possible failure regions are studied.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Ismail Ucun, Mehmet Colakoglu and Suleyman Tasgetiren, 2008. Stress Analysis of Marble Sawing Disc in Cutting Process. Journal of Applied Sciences, 8: 876-880.

DOI: 10.3923/jas.2008.876.880

URL: https://scialert.net/abstract/?doi=jas.2008.876.880

COMMENTS
25 January, 2021
Khine Myat Swe:
DEr Sir/MadamPlease provisw full article of Stress Analysis of Marble Sawing Disc in Cutting Process
Ismail Ucun, Mehmet Colakoglu and Suleyman Tasgetiren
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom