Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2008 | Volume: 8 | Issue: 4 | Page No.: 574-584
DOI: 10.3923/jas.2008.574.584
Design and NC Machining of Ball-End Taper Cutter with Constant Pitch
Sheng-Hua Lee, Tian-Syung Lan, Yu-Tang Chen and Wei-Fang Chen

Abstract:
This study presents the design models of the cutting edge and groove of the ball-end taper cutter with constant pitch. The section profile and relative feeding speeds of the grinding wheel in the NC machining of the cutter are deduced. The problems of remaining revolving surface and no cutting edge strip on the tip part of the ball-end of cutter are post-processed according to the computer simulation result of the actual groove surface. A ball-end taper cutter with ideal grooves may be obtained.
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Sheng-Hua Lee, Tian-Syung Lan, Yu-Tang Chen and Wei-Fang Chen, 2008. Design and NC Machining of Ball-End Taper Cutter with Constant Pitch. Journal of Applied Sciences, 8: 574-584.

DOI: 10.3923/jas.2008.574.584

URL: https://scialert.net/abstract/?doi=jas.2008.574.584

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom