Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2008 | Volume: 8 | Issue: 13 | Page No.: 2491-2495
DOI: 10.3923/jas.2008.2491.2495
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

A Novel Control Scheme for Temperature Control of Machine Tool Coolers

Kuei- I Tsai, Fu-Jen Wang, Hao- Chuan Lee and Hsu -Cheng Chiang

Abstract:

A novel Proportional-Integral-Derivative (PID) control method is proposed for the oil cooler of machine tools to achieve better set-point tracking and disturbance rejection performance. The simple PID controller based on Smith predictive method is adopted as the basic controller. To deal with the nonlinear time varying and time delay characteristic of the system, the PWM (pulse width modulation) technique is then chosen as an auxiliary duty ratio control to modulate the bypass solenoid valve to provide precise oil temperature control. Both simulation results using MATLAB and on-site experimental results are presented and compared extensively for demonstrating the effectiveness of the proposed control scheme. The control scheme not only improves the performance of PID controllers cost-effectively but also maintains permanent temperature control specific for machine tool coolers.

PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Optimal Design of Neural Fuzzy Inference Network for Temperature Controller
How to cite this article:

Kuei- I Tsai, Fu-Jen Wang, Hao- Chuan Lee and Hsu -Cheng Chiang, 2008. A Novel Control Scheme for Temperature Control of Machine Tool Coolers. Journal of Applied Sciences, 8: 2491-2495.

DOI: 10.3923/jas.2008.2491.2495

URL: https://scialert.net/abstract/?doi=jas.2008.2491.2495

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom