Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2008 | Volume: 8 | Issue: 6 | Page No.: 1097-1102
DOI: 10.3923/jas.2008.1097.1102
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Development of Classified Fly Ash as a Pozzolanic Material

Sumrerng Rukzon and Prinya Chindaprasirt

Abstract:
This research studies the potential for using classified fly ash from Mae Moh power plant in Thailand as a pozzolanic material. Three different fly ash finenesses viz., coarse Original Fly Ash (OFA), Medium Fly Ash (MFA) and Fine Fly Ash (FFA) were used for the study. Ordinary Portland Cement (OPC) was partially replaced with fly ash at 20 and 40% by weight of binder. The water to binder ratio was kept constant at 0.5 and the flow of mortar was maintained at 110±5% with the aid of superplasticizer (SP). Compressive strength, carbonation depth and porosity test of mortars were determined. FFA has a high potential to be used as a good pozzolanic material. The use of FFA produces mortars with good strength and low porosity. The resistance to carbonation of mortar improves with partial replacement of FFA in comparison with the normal coarse fly ash. The use of FFA results in a strong and dense mortar which is due to better dispersion and filling effect as well as an increase in the pozzolanic reaction.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Strength and Porosity of Bagasse Ash-based Geopolymer Mortar
  •    Influence of Fly Ash on Behavior of Fibres Reinforced Concrete Structures
How to cite this article:

Sumrerng Rukzon and Prinya Chindaprasirt, 2008. Development of Classified Fly Ash as a Pozzolanic Material. Journal of Applied Sciences, 8: 1097-1102.

DOI: 10.3923/jas.2008.1097.1102

URL: https://scialert.net/abstract/?doi=jas.2008.1097.1102

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom