Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 15 | Page No.: 1998-2001
DOI: 10.3923/jas.2007.1998.2001
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
Low Cost Transition Metals Doping over Tio2 for Denox Catalyst Deposited onto Woven Stainless Steel Wire Mesh
Kamariah Noor Ismail and Ku Halim Ku Hamid

Abstract:
The objective of the present study was to develop a high porosity NOx reduction catalyst using cobalt and multi-component metal from low cost transition element which was deposited onto woven stainless steel wire-mesh monolith honeycomb by sol-gel method. These metals were mixed with titanium (iv) isopropoxide as a metal oxide precursor in sol-gelphase whereby metal titanium also acts as catalyst. The reduction activity of the prepared catalyst was investigated by using Temperature Program Reduction (TPR) instrument. It was found that the synthesized catalyst has shown high porosity in which it was reflected to an amount of single point BET surface area (100.065 m2 g-1) obtained from TPR data. The morphology of the synthesized catalyst particles was analyzed by using scanning electron, microscope (SEM).
PDF References Citation Report Citation
How to cite this article:

Kamariah Noor Ismail and Ku Halim Ku Hamid , 2007. Low Cost Transition Metals Doping over Tio2 for Denox Catalyst Deposited onto Woven Stainless Steel Wire Mesh. Journal of Applied Sciences, 7: 1998-2001.

DOI: 10.3923/jas.2007.1998.2001

URL: https://scialert.net/abstract/?doi=jas.2007.1998.2001

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom