Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2007 | Volume: 7 | Issue: 7 | Page No.: 1085-1087
DOI: 10.3923/jas.2007.1085.1087
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Medium Density Fiberboard from Quercus robur

Mehmet Akgul, Yalcin Copur, Cengiz Guler, Ayhan Tozluoglu and Umit Buyuksari

Abstract:
The objective of this study was to investigate the suitability of oak (Ouercus robur L.) wood fibers from Turkey as a raw material for medium density fiberboard. In this study, some of the oak wood parts that are especially not suitable for other forest industries was utilized to produce fiberboards in laboratory environment. Test panels of varying densities (0.6, 0.7 and 0.8 g cm-3) were produced at 18 mm thickness using urea-formaldehyde adhesive. Mechanical, water resistance and dimensional stability properties of the test panels were determined according to Turkish standards. The results indicated that laboratory MDF panels produced using oak fibers resulted in mechanical properties that exceed (except panel type A) levels specified in the appropriate existing standards for the general propose fiberboards.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Production of Medium Density Fibreboard (MDF) from Oil Palm Trunk (OPT)
How to cite this article:

Mehmet Akgul, Yalcin Copur, Cengiz Guler, Ayhan Tozluoglu and Umit Buyuksari, 2007. Medium Density Fiberboard from Quercus robur. Journal of Applied Sciences, 7: 1085-1087.

DOI: 10.3923/jas.2007.1085.1087

URL: https://scialert.net/abstract/?doi=jas.2007.1085.1087

COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom