Subscribe Now Subscribe Today
Science Alert
Curve Top
Journal of Applied Sciences
  Year: 2004 | Volume: 4 | Issue: 2 | Page No.: 225-230
DOI: 10.3923/jas.2004.225.230
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Galvanochemical Treatment Method of Copper-ammonia Bearing Rinse Wastewater

Husam Damen AL- Hamaiedeh

The galvanochemical treatment of copper-ammonia bearing rinse wastewater have been investigated. Experiments using drum type galvanic reactor were carried out to explore the optimum parameters of this method. Iron and copper cuttings were used as load in the reactor. A high copper removal efficiency was achieved, the optimum detention time was found to be 20-30 min. In order to increase the treatment efficiency, the reuse of the formed sludge in the treatment were studied, the results showed that as sludge recycling increases the treatment efficiency increases and the required detention time decreases
PDF Fulltext XML References Citation Report Citation
How to cite this article:

Husam Damen AL- Hamaiedeh , 2004. Galvanochemical Treatment Method of Copper-ammonia Bearing Rinse Wastewater. Journal of Applied Sciences, 4: 225-230.

DOI: 10.3923/jas.2004.225.230






Curve Bottom