Subscribe Now Subscribe Today
Science Alert
 
FOLLOW US:     Facebook     Twitter
Blue
   
Curve Top
Journal of Applied Sciences
  Year: 2001 | Volume: 1 | Issue: 3 | Page No.: 239-243
DOI: 10.3923/jas.2001.239.243
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail
Heat Treatment Effects on Mechanical Properties of (α+β) and Lead-tin Brasses
Abdul Faheem Khan, Anwar Manzoor Rana , Abdus Salam , M. Iqbal Ansari and Nazar Hussain

Abstract:
Commercially available two different compositions of (α+β) brass and lead-tin-brass were annealed, normalized and solution treated at 815°C for 1/2hr. The tensile test data were analyzed to fine the UTS (ultimate tensile strength), elastic modulus, %elongation and reduction in area. The UTS of (α+β) brass with different heat treatments was found to vary between 360.81 to 417.40 MPa with elongation of 8.6-32.0% and between 399.72 to 474.00 MPa with elongation of 4.6-9.9% for lead-tin-brass. The Rockwell hardness (HRF) with these heat treatments was observed to decrease variably for (α+β) brass and also for annealed and normalized samples of lead-tin-brass but increased for solution treated sample.
PDF References Citation Report Citation
How to cite this article:

Abdul Faheem Khan, Anwar Manzoor Rana , Abdus Salam , M. Iqbal Ansari and Nazar Hussain , 2001. Heat Treatment Effects on Mechanical Properties of (α+β) and Lead-tin Brasses. Journal of Applied Sciences, 1: 239-243.

DOI: 10.3923/jas.2001.239.243

URL: https://scialert.net/abstract/?doi=jas.2001.239.243

 
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

       

       

Curve Bottom