Subscribe Now Subscribe Today
Science Alert
 
Blue
   
Curve Top
Biotechnology
  Year: 2007 | Volume: 6 | Issue: 2 | Page No.: 153-164
DOI: 10.3923/biotech.2007.153.164
 
Facebook Twitter Digg Reddit Linkedin StumbleUpon E-mail

Design of Wireless Power and Data Transmission Circuits for Implantable Biomicrosystem

Ghazi Ben Hmida , Hamadi Ghariani and Mounir Samet

Abstract:
This study describes the design of an inductive powering system that combines power transfer with data transmission for implantable biomicrosystem. The implant receives power from an external transmitter through an inductive link between an external power transmission coil and the implanted receiving coil. We designed a transmitter with class E power amplifier to provide maximum power with high-efficiency. It is possible to obtain about 136 mW of power in the secondary system with an efficiency of about 50%. A bit rate of 1 Mbps is achieved for sending command data to the implant. We propose a communication system for the medical implants which uses inductive link. This system is consisted of a class E power amplifier, an ASK modulator, an inductive link and an ASK demodulator.
PDF Fulltext XML References Citation Report Citation
 RELATED ARTICLES:
  •    Improved LC Filter in Class D Amplifier using Simulated Inductor
  •    Controller Design for an Uncertain Contactless Power Transfer System
  •    Neural Network-based Constant Current Control of Dynamic Wireless Power Supply System for Electric Vehicles
  •    MEMS-based Reconfigurable CMOS LNAs for Wireless Applications
How to cite this article:

Ghazi Ben Hmida , Hamadi Ghariani and Mounir Samet , 2007. Design of Wireless Power and Data Transmission Circuits for Implantable Biomicrosystem. Biotechnology, 6: 153-164.

DOI: 10.3923/biotech.2007.153.164

URL: https://scialert.net/abstract/?doi=biotech.2007.153.164

COMMENTS
09 December, 2016
Mubashir Hussain:
Hello,
I want to take permission to use the Figure. 1, circuit image in my review paper.
There is no permission option in link.
Can I use this image
COMMENT ON THIS PAPER
 
 
 

 

 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Curve Bottom