LI Xu-Bin
College of Material Science and Engineering, North University of China, Taiyuan, 030051, Shanxi, China
Zhang Zhi-Min
College of Material Science and Engineering, North University of China, Taiyuan, 030051, Shanxi, China
ABSTRACT
HAL60-1-1 aluminum brass alloy hot compression characteristics have been investigated for its microstructure examination in Gleeble-1500 thermal simulation experiments in strain rate of 0.01-10S-1, deformation temperature of 650-800°C, Analyzed the rheological stress, the flow stress is reduced with deformation temperature increased and increased with the increase in strain rate. When alloy processing temperature at 750°C and the deformation rate in 0.1 S-1, the primary alpha phase has equiaxial shape and uniform composition, the alloy dynamic recovery is flat and the deformation has lowest reinforcement.
PDF References Citation
Received: June 05, 2013;
Accepted: October 08, 2013;
Published: November 16, 2013
How to cite this article
LI Xu-Bin and Zhang Zhi-Min, 2013. Research on Aluminum Brass Alloy Hot Compressive Deformation Characteristics. Journal of Applied Sciences, 13: 5458-5462.
DOI: 10.3923/jas.2013.5458.5462
URL: https://scialert.net/abstract/?doi=jas.2013.5458.5462
DOI: 10.3923/jas.2013.5458.5462
URL: https://scialert.net/abstract/?doi=jas.2013.5458.5462
REFERENCES
- Lancaster, J.K., 1990. Material-specific wear mechanisms: Relevance to wear modelling. Wear, 141: 159-183.
CrossRefDirect Link