Huang Long
School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin, Heilongjiang, 150080, China
Yu Guang-Bin
Harbin Institute of Technology, Harbin, Heilongjiang, 150001, China
Chen Ju-Hui
School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin, Heilongjiang, 150080, China
Zhao Yang
Harbin Institute of Technology, Harbin, Heilongjiang, 150001, China
Zhao Lei
School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin, Heilongjiang, 150080, China
ABSTRACT
Based on the concentrated parameters theory, a 7-freedom coupled vibration dynamic model of the non-orthogonal face gear transmission system is established, which includes time-varying mesh stiffness, the tooth backlash clearance and transmission error. In the model, the torsion oscillation of the gear pair, the axial vibration aroused by tooth meshing force and the lateral oscillations resulting from flexional deformation of the gear shaft are taken into account. The mesh stiffness fluctuation is developed as 5-order Fourier series and the tooth backlash clearance is fitted by 7-order polynomial function. Through the Gear method, the dynamic response of the system is obtained and the vibration characteristics are analyzed.
PDF References Citation
How to cite this article
Huang Long, Yu Guang-Bin, Chen Ju-Hui, Zhao Yang and Zhao Lei, 2013. Research on Nonlinear Vibration Characteristics of Non-orthogonal Face Gear Transmission. Information Technology Journal, 12: 8102-8108.
DOI: 10.3923/itj.2013.8102.8108
URL: https://scialert.net/abstract/?doi=itj.2013.8102.8108
DOI: 10.3923/itj.2013.8102.8108
URL: https://scialert.net/abstract/?doi=itj.2013.8102.8108
REFERENCES
- Lin, T.J. and X.T. Ran, 2012. Nonlinear vibration characteristic analysis of a face-gear drive. J. Vibr. Shock, 31: 25-31.
CrossRef - Litvin, F., G. Argentieri, M. De Donno and M. Hawkins, 2000. Computerized design, generation and simulation of meshing and contact of face worm-gear drives. Comput. Methods Applied Mech. Eng., 189: 785-801.
CrossRef - Litvin, F., A. Egelja, J. Tan and G. Heath, 1998. Computerized design, generation and simulation of meshing of orthogonal offset face-gear drive with a spur involute pinion with localized bearing contact. Mech. Mach. Theory, 33: 87-102.
CrossRef - Litvin, F., R.B. Bossler, Y.J.D. Chen, Y. Zhang and J.C. Wang, 1992. Design and geometry of face-gear drives. ASME J. Mech. Des., 114: 642-647.
CrossRef - Wang, H.X., Y. Hou and R.P. Zhu, 2009. Tooth surface equations of non-orthogonal face gear and simulation. Jiangsu Mach. Build. Autom., 38: 94-97.
CrossRef - Yang, Z., S.M. Wang, Y.S. Fan and H.X. Liu, 2010. Nonlinear dynamics of face-gear transmission system. J. Vibr. Shock, 29: 26-35.
CrossRef - Zhu, R.P. and D.P. Gao, 1999. Study on the method of avoiding dedendum undercutting and addendum pointing in face gear design. China Mech. Eng., 11: 1274-1276.
Direct Link