Citations in impact factor journals
COMPREHENSIVE APPROACH TO THE INFLUENCE OF FREQUENTLY USED
SECONDARY RAW MATERIALS ON CLAY BRICKS QUALITY USING MATHEMATICAL MODELING (A
SYSTEMATIC REVIEW) Ceramics International |
Using charcoal to increase properties and durability of fired test briquettes Construction and Building Materials |
The effects of by-products incorporated in low-strength concrete
for concrete masonry units Construction and Building Materials |
Influences of agro-wastes on the physico-mechanical and durability properties of unfired clay blocks Construction and Building Materials |
Feasibility of Using Waste Glass Sludge in Production of
Ecofriendly Clay Bricks Journal of Materials in Civil Engineering |
Determination of Useful Life of Red Ceramic Parts
Incorporated with Ornamental Stone Waste Journal of Materials in Civil Engineering Vol. 31, Issue 2, 04018381, 2019 |
Sustainable Reuse of Inorganic Materials in Eco-Friendly Clay Bricks: Special Focus on Mechanical and Durability Assessment Journal of Materials in Civil Engineering Vol. 33, Issue 6, 04021111, 2021 |
Citation to this article as recorded by
A Comparison of Thermal and Mechanical Properties of
Clay Bricks Prepared with Three Different Pore-Forming Additives:
Vermiculite, Wood Ash, and Sawdust Environmental Progress & Sustainable Energy |
Effects of waste glass addition on the physical and mechanical properties of brick Innovative Infrastructure Solutions Vol. 6, Issue 1, , 2021 |
Water absorption properties of sawdust lignin stabilised
compressed laterite bricks Case Studies in Construction Materials |
Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks Journal of Building Engineering |
Physico-mechanical and thermal performances of eco-friendly fired clay bricks incorporating palm oil fuel ash Materialia |
EXPERIMENTAL STUDY ON STRENGTH AND DURABILITY CHARACTERISTICS OF ECO-FRIENDLY FIRED CLAY BRICKS INCORPORATING MARBLE WASTE Journal of Asian Architecture and Building Engineering |
SDA and laterite applications in concrete: Prospects and effects
of elevated temperature Cogent Engineering Vol. 4, Issue 1, , 2017 |
Experimental study of the mechanical properties of burnt clay bricks incorporated with plastic and steel waste materials IOP Conference Series: Earth and Environmental Science Vol. 899, Issue 1, 012042, 2021 |
Study of the Effects of Waste Glass Additives on the Properties and Compliance level of Fired Ceramic Masonry Bricks IOP Conference Series: Materials Science and Engineering Vol. 1107, Issue 1, 012053, 2021 |
Application of Compliance to Cost Ratio (C-Cr) analysis in the Determination of Optimum Mix for Insulating Bricks IOP Conference Series: Materials Science and Engineering Vol. 1107, Issue 1, 012158, 2021 |
Use of Firewood Ash Waste in Electrical Siliceous
Porcelain Materials Research Vol. 22, Issue suppl 1, , 2019 |
Influence of Sawdust Particle Sizes on the Physico-Mechanical Properties of Unfired Clay Blocks Designs Vol. 5, Issue 3, 57, 2021 |
Characterization of Three Amu-Darya Basin Clays in Ceramic Brick Industry and Their Applications with Brick Waste Materials Vol. 14, Issue 23, 7471, 2021 |
How to cite this article
Emmanuel A. Okunade , 2008. The Effect of Wood Ash and Sawdust Admixtures on the Engineering Properties of a Burnt Laterite-Clay Brick. Journal of Applied Sciences, 8: 1042-1048.
DOI: 10.3923/jas.2008.1042.1048
URL: https://scialert.net/abstract/?doi=jas.2008.1042.1048
DOI: 10.3923/jas.2008.1042.1048
URL: https://scialert.net/abstract/?doi=jas.2008.1042.1048