Thundil Karuppa Raj, R. and D. Nachiappan, 2009. Numerical prediction of flow distribution and heat transfer in annular air gap of conventional electrical machines. Proceeding of the SAE India International Mobility Engineering Congress, 2009, Chennai -.

Thundil Karuppa Raj, R. and V. Ganesan, 2005. Experimental and numerical analysis of various turbulence models in a 45 ° vane swirler. Proceeding of the 14th International ISME Conference, 2005 Delhi College of Engineering, India -.

Thundil Karuppa Raj, R. and V. Ganesan, 2005. Numerical analysis of reacting flow through a 45° vane swirler in a model gas turbine combustor. Proceeding of the 19th National conference on Internal Combustion Engineering, 2005, Chidambaram, India -.

Thundil Karuppa Raj, R. and V. Ganesan, 2005. Numerical and experimental investigation of flow through vane swirlers. Proceeding of the IMECE 2005, ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Florida, USA -.
CrossRef  |  

Thundil Karuppa Raj, R. and V. Ganesan, 2005. Study of flow through a vane swirler with and without hub. Proceeding of the 32nd National conference on Fluid Mechanics and Fluid Power, 2005, Osmanabad, India -.

Thundil Karuppa Raj, R. and V. Ganesan, 2006. Effect of Pitch chord ratio (S/C) and side wall expansion angle (α) on flow through vane swirlers. Proceeding of the IMECE 2006, ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, USA -.
CrossRef  |  

Thundil Karuppa Raj, R. and V. Ganesan, 2006. Experimental and numerical investigations of swirling flow in a dump combustor. Proceeding of the 3rd BSME-ASME International Conference on Thermal Engineering, December 2006, Dhaka, Bangladesh -.

Thundil Karuppa Raj, R. and V. Ganesan, 2008. Study on the effect of various parameters on flow development behind vane swirlers. Int. J. Thermal Sci., 47: 1204-1225.
CrossRef  |  

Thundil Karuppa Raj, R. and V. Ganesan, 2009. Experimental study of recirculating flows induced by vane swirler. Indian J. Eng. Mater. Sci., 16: 14-22.
Direct Link  |  

Thundil Karuppa Raj, R. and V. Selvam, 2009. Failure analysis and design optimization of plastic parts-instrument panel in off-road vehicles. Proceeding of the International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies TEAM-TECH, 2009, Bangalore -.